For Those of You In A Hurry…

BeerSci: How To Brew A Beer In A Week

 

A couple of days ago, one of the PopSci.com edit staff asked me if it was possible to brew a beer in time for election day. That’s related to one of the most-often encountered questions I get about homebrewing: How long does it take to make beer? My standard answer is “approximately six weeks,” because here at BeerSci we tend to brew styles that benefit from that schedule, and we have a limited amount of space for non-essential equipment such as giant cylinders of CO2.

But it is entirely possible to brew a beer in seven days, provided you 1) know what the hell you are doing and 2) have the necessary equipment, or 3) have a WilliamsWarn Personal Brewery. (If you want to buy one, go here.)

Most of my knowledge on this subject comes from articles in Zymurgy and Brew Your Own, because BeerSci headquarters is an apartment in Brooklyn, NY, and whatever space we have is dedicated to fermenting multiple beers at once rather than kegging. (As an aside, Zymurgy and Brew Your Own are great resources for homebrewers and if you don’t have subscriptions, you might want to consider it.) The November/December 2011 issue of Zymurgy has an entire feature article on seven-day brewing.

For those unfamiliar with brewing, the process can be broken down into a few basic steps. 1) Make the wort and pitch the yeast. 2) Ferment. 3) Separate the beer from the sludge of yeast and protein at bottom of fermentation vessel. 4) Carbonate, which can be done either slowly by yeast, or quickly with a tank of carbon dioxide.

The BeerSci typical brewing schedule is: 1) Make wort/pitch yeast, which takes a few hours. 2) Ferment in primary for seven to 10 days. 3) Separate beer from yeast/protein sludge by racking it into a secondary vessel, where it sits for a further 10-14 days to clarify and for the residual yeast cells to mop up any weird off-flavors. 4) Bottle beer and let yeast produce carbonation naturally, which takes another 10-14 days.

Under the right conditions, fermentation can take as little as four days, and not all beers require resting in a secondary, so carbonation through bottle conditioning is the limiting step in the BeerSci process. If you force-carbonate the beer (like how they carbonate soft drinks), you can cut that down the carbonation step to a day or less.

The main issues a brewer must consider when making a seven-day beer is to choose a forgiving beer style — something with a big flavor so it’ll mask any off-flavors the yeast naturally produce during the major fermentation step — and a yeast strain that flocculates well. Flocculation means that the yeast cells clump together and fall into a sediment cake at the bottom of the brewing vessel, rather than staying suspended in your beer, making the beer hazy and the consumer more prone to the dreaded Homebrew Farts. We came up with an all-American pale ale for election night, but stouts, porters and milds will all fit the bill. Most of the recipes I’ve seen also have modest original gravities, and that makes sense: no point giving the yeast so much sugar that they can’t ferment it all in four days. Stressed yeast means crappy beer.

Speaking of stressed yeast — when you’re looking for a quick fermentation, it’s best if you start with a lot of yeast. In normal fermentation schedules, the yeast multiples to optimal levels by itself. But you want this to go fast with as little chance of stressing the poor cells out, so pitch extra. A double dose — two smack-packs of yeast instead of one, for example — for a low-gravity beer should be OK. Alternatively, you could either harvest a goodly amount of slurry from a previous batch or make a 1.5 to 2L starter from one pack.

So, what does a brewing schedule look like for one of these beers?
Day 1: Make the wort
Days 2, 3, 4, 5: Ferment
Day 6: Crash-cool the beer (e.g. put it in a bathtub full of salty icewater or put it in the fridge) to flocculate as much yeast and precipitate as much protein as possible. Rack the beer into a new vessel.
Day 7: Rack the beer into a keg (you will have gotten a lot more yeast flocculating overnight), then force-carbonate it. Force-carbonating just means that you force carbon dioxide into the headspace in the keg, where it eventually dissolves into the beer. The carbonation can take as little as a couple of minutes, but best to leave it a few hours. There are ways to do this, and your best bet is to look at videos online or have someone who knows what they’re doing to either do it for you, or show you how to do it. You don’t want to have your Bipartisan Brew turn into a Bipartisan Bomb.

If you brew this weekend, you will be able to crash, rack and carbonate your beer by next Sunday or Monday, and it will be ready for whatever merry hell the news will deliver on Tuesday evening.

Recipe: Bipartisan Brew
Style: American Pale Ale
Type: All Grain
Taste: (30.0) 

Recipe Specifications
--------------------------
Batch Size (fermenter): 5.00 gal   
Estimated OG: 1.040 SG
Estimated Color: 7.0 SRM
Estimated IBU: 25.7 IBUs
Brewhouse Efficiency: 70.00 %
Est Mash Efficiency: 80.5 %
Boil Time: 60 Minutes

Ingredients:
--------------------------
Amt                   Name                                           
7 lbs 4.0 oz        Pale Malt (2 Row) US 
8.0 oz                Caramel/Crystal Malt - 80L 
4.0 oz                Carapils 
0.0 oz                Caramel Malt - 120L 

1.00 oz               Cascade [5.50 %] - Boil 60.0 min
0.50 oz               Cascade [5.50 %] - Boil 15.0 min
0.50 tablet         Whirlfloc Tablet (Boil 5.0 mins)
0.50 oz               Cascade [5.50 %] - Aroma Steep 0.0 min 
2.0 pkg               American Ale II (Wyeast Labs #1272) 

Mash Schedule: Single Infusion, Light Body, Batch Sparge
Total Grain Weight: 8 lbs
----------------------------
Name              Description                             Step Temperat Step Time     
Mash In           Add 10.00 qt of water at 159.1 F        148.0 F       75 min        

Sparge: Batch sparge with 3 steps (0.72gal, 2.26gal, 2.26gal) of 168.0 F water
(PopSci)

 

This entry was posted in Glenn's Pint of GFY. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *